Aluminum Sectional Rail and Stile Doors

Designed for peak performance and strength, this 2″ thick Raynor AlumaView AV200 aluminum sectional rail and stile door is available in larger sizes and features bold rail construction for maximum durability, reliability, and beauty. Build your door with ThermaXPS™ insulation for increased thermal performance.

24 features 66a3965e03e2a 2

Years of Durability

AlumaView AV200 door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 20 p.s.f. Higher pressure ratings are available upon request.

24 features 66a3965e08ec9

Rugged Hardware and Springs

The AlumaView AV200 door comes packaged with the right combination of hardware, track, and springs to match your door’s size and application.

24 features 66a3965e05862 1

Snap-in Retainer

AlumaView AV200 panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.

24 features 66a3965e05c77 1

Jamb Seal

EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the AV200 door when closed.

24 features 66a3965e06c04

EnduraCote™

The EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.

24 features 66a3965e07813

Aluminum Panels

For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from impact-resistant and insulated panels as well.

24 features 66a3965e07e94

Locks

In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.

24 features 66a3965e08428

Pedestrian Doors*

Pedestrian doors are designed for convenient entry and to help minimize energy loss. *Some options may be limited to door size or model.

24 features 66a3965e08b6c

Customized Track

Track systems are supplied to fit special clearances, inclines, or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available. *Some options may be limited to door size or model.

24 features 66a396b6281d3

IECC Requirements Package/California Title 24

The International Energy Conservation Code (IECC) requires building components to meet minimum Air Infiltration rates. This option will ensure the AV300 and AV200 will exceed the latest IECC and Title 24 standards for air infiltration (only), by using the required header and jamb seals and track mounting. Exhaust ports and pass doors cannot be used. Visit our IECC page for more information.

24 features 66a3965e0501b

Rail & Stile Insulation

ThermaXPS™ insulation fills the AV200 rails and stiles to boast an R-value of 4.31**. This closed-cell insulation has minimal water absorption and prevents mold and mildew. Combine the ThermaXPS, along with our other energy-saving door features, and you will have a top-notch thermal solution. **10×10 door built with both double end stiles and ½” insulated Low-E Glass.

24 features 66a3965e054aa

Decreased Energy Costs

AlumaView AV200 door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 20 p.s.f. Higher pressure ratings are available upon request.

24 features 66a3965e060f4

Header Seal

A flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the AlumaView AV200 door against the header.

24 features 66a3965e06506

Choice of Windows

For maximum design flexibility, choose from tempered, tinted, double-strength, insulated, acrylic, polycarbonate, or impact-resistant glass in a variety of thicknesses.

24 features 66a3965e068f0

SleekSightline™

AlumaView AV200 and AV300 models offer a sleek 1-pane or trendy 2-pane glass layout. These new glass layouts are available now and vary depending on glass type and door size.

39 features 66a3982a0a94e

High-cycle Counterbalance System

For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system..

24 features 66a3965e08199

Carbon Monoxide Vent

Allows you to channel fumes to the outside when the door is closed. Available in a variety of sizes.

24 features 66a3965e08718

Removable Center Posts

Carry-away, swing-up options available for extra-wide openings. Ideal for agricultural or airplane hangar applications.

24 features 66a3965e06fa3

Anodized Finishes

Choose from three custom anodized finishes including clear, dark bronze, and black.

24 features 66a3965e07b58

Elegant Finish Woodtones™

Aluminum coated with durable and long-lasting material that delivers a high definition wood grain look.

Anodized Finish Options

202407261345Clear Anodize 720x720 1 150x150 1

White

202407261355Dark Bronze Anodize 720x720 1 150x150 1

Dark Brown

202407261308Black Anodize 720x720 1 150x150 1

Black

Elegant Finish Woodtones™ Options

202407261300GoldenOak 720x720 1 150x150 1

Golden Oak

202407261304Teak 720x720 1 150x150 1

Teak

202407261309Cherry 720x720 1 150x150 1

Cherry

202407261312KnottyPine 720x720 1 150x150 1

Knotty Pine

202407261318ColonyMaple 720x720 1 150x150 1

Colony Maple

202407261322Oak 720x720 1 150x150 1

Golden Oak

202407261324Aged Dark Oak 720x720 1 150x150 1

Aged Dark Oak

202407261324CherryFlame 720x720 1 150x150 1

Cherry Flame

202407261330DarkWalnut 720x720 1 150x150 1

Dark Walnut

202407261343EuropeanCherry 720x720 1 150x150 1

European Cherry

202407261348AmericanMaple 720x720 1 150x150 1

American Maple

202407261353NationalWalnut 720x720 1 150x150 1

National Walnut

202407261353TableCherry 720x720 1 150x150 1

Table Cherry

Section and Panel Schedules

Door WidthNumber of Panels
Up to 9′ 2″2
9′ 3″ – 12′ 2″3
12′ 3″ – 16′ 2″4
16′ 3″ – 20′ 2″5
20′ 3″ – 24′ 2″6
Door HeightNumber of Sections
Up to 8′ 2″4
8′ 3″ – 10′ 6″5
10′ 7″ – 12′ 6″6
12′ 7″ – 14′ 6″7
14′ 7″ – 16′ 6″8
 
Select a link below to download AlumaView AV200 specifications and drawings.
WordPDF
AV200 Product SpecsDOCXPDF
AV Series Product Line SpecsDOCXPDF
Full Sectional Product Line SpecsDOCXPDF

Standard Drawings

2-inch Track/Bracket-Mounted
Normal HeadroomPDF
Lift ClearancePDF
Vertical LiftPDF
Low Headroom Front-MountPDF
Low Headroom Rear-MountPDF
2-inch Track/Angle-Mounted
Normal HeadroomPDF
Lift ClearancePDF
Vertical LiftPDF
Low Headroom Front-MountPDF
Low Headroom Rear-MountPDF
3-inch Track/Angle-Mounted
Normal HeadroomPDF
Lift ClearancePDF
Vertical LiftPDF
Low Headroom Front-MountPDF
Low Headroom Rear-MountPDF
Door
ModelAlumaView AV200
Size24′ x 24′ Max
OperationManual, Motor or Hand Chain
IECC Thermal PerformanceTested U-Factor 0.72 (w/ insulated, Low E glass)
Tested U-Factor 0.76 (w/ insulated, clear glass)
Tested U-Factor 1.10 (w/ DSB glass)
Sections
ConstructionRail & Stile – minimum .05″; 5/16″ diameter screws
MaterialAluminum
Surface TextureSmooth
Section JointTongue-in-Groove
Section Thickness2″
GaugeN/A
StilesExtruded aluminum – minimum .05″
Rail & Stile InsulationThermaXPS
SealsBottom Seal (3″, 4″ Gray; 3″ Yellow; or 3″ Black EPDM), Optional Header Seal. Optional IECC and California Title 24 air filtration compliant package available.
TrussingWind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge);Sizes: 4″, 6″, or 8″
Panel Configuration.50″ thick Aluminum panels
ColorClear and Optional Anodized Finishes, ArmorBrite Powder Coat System, or Elegant Finish Woodtones
WindowsVarious styles of glass options are available in 1/8” single pane, 3/16” single pane, ¼” single pane and ½” insulated configurations.
Track
TypeNormal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options
FinishGalvanized or Optional White Powder Coat
Size2″ or 3″
Gauge13 and 16-Gauge
Counterbalance System
TypeTorsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance
SpringsSpring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat
ShaftsTube or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed)
Hardware/Accessories
Hinges11, 13, 14-Gauge or Hybrid
RollersStandard (2″ or 3″) or Heavy Duty (2″ or 3″)
FinishGalvanized or Optional White Powder Coat
LockInterior Slide Lock or Exterior Lock Bars
Seal(s)Jamb Seal
Hanger Angle11, 13-Gauge Galvanized or 13-Gauge White Powder Coated
Pedestrian Door32″ Wide x 3 Sections High
Optional Wind LoadingCertified Wind Load Available

Door Sections:

Raynor® warrants the door sections against defects in material and workmanship for five (5) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for three (3) years from the date of delivery to the original purchaser.

Hardware:

Raynor® warrants all hardware against defects in material and workmanship for one (1) year from the date of delivery to the original purchaser.

Springs:

Raynor® warrants springs against defects in material and workmanship for one (1) year from the date of delivery. The limited warranty for special high-cycle springs is prorated by percentage of cycle use, and must be determined by the use of a non-resettable cycle counter.

ArmorBrite™:

Doors equipped with ArmorBrite powder coat carry a warranty against cracking or peeling (losing adhesion) for three (3) years from the date of delivery to the original purchaser.

Elegant Finish Woodtones™:

Single Family Residential and All Other Residential (including installation on rental properties, homes owned by common condominium associations or similar organizations):

5-Year Elegant Finish Woodtones Limited Warranty

For a period of 5 years, Raynor warrants the appearance of aluminum sections made with Elegant Finish Woodtones per the specifications set forth per AAMA 2604:

1. Product coated will not fade in color more than 5 ΔE units as measured by Hunter Lab color difference as set forth per AAMA 2604 specifications as of the application date and in such way as to significantly adversely affect the appearance of the surface to which the product has been applied and result in damage to the surface.

2. Coated surface will exhibit gloss retention of a minimum of 30% of the original using a 60-degree reading per AAMA 2604 specifications.

3. Coating shall not chalk in excess of standard number 8 as illustrated in the ASTM D4214 test method A.

Woodtone finishes may vary across a section due to material runs at the supplier, environmental, chemical, or equipment variations and are not considered a manufacturing defect and do not constitute a basis for complaint under this limited warranty. Color match on new or replacement section(s) is not warranted nor guaranteed. As with real wood products, simulated woodtone doors will have variation in color finish. These are normal to the manufacturing process and add to the characteristic individual nature of the product.

Warranty Limitations and Exclusions:

Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by a qualified installer. This warranty applies only to door systems that are professionally installed by an authorized Raynor Dealer.

This limited warranty extends only to the original purchaser, provided the door is installed in the original purchaser’s place of business. This limited warranty is not transferable.

This limited warranty does not apply to black, charcoal, slate, and iron ore steel colors used on Raynor EnergyCore series, ThermaSeal Series, Commercial Country Manor and Commercial Aspen series doors when installed in areas experiencing extreme heat for prolonged periods of time. The result of these environmental conditions can elicit a failure of the polyurethane core of the door. The warranty also excludes doors which have been field painted where the paint does not include a solar reflective additive.

This limited warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. It also does not apply to damage or deterioration caused by saltwater coastal areas, hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this limited warranty. Field applied paint failure is not covered by this limited warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.

This limited warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this limited warranty.

This limited warranty does not apply to building damage caused by moisture infiltration through or around the door. A garage door system is water resistant, but not waterproof. When a garage door system is properly assembled, installed, and maintained the risk of significant water infiltration is low.

Raynor shall not be liable for any consequential or incidental damages.

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.