DuraGrille™
DuraGrille™
Rolling Security Grille Doors
Grille
Offered in a contemporary brick pattern or traditional straight pattern (shown), grilles are constructed of 5/16” mill-finished aluminum rods with 9″ center-to-center interlocking links.
Aluminum Guides
Extruded aluminum guides are lined with a replaceable wool pile strip to reduce wear and provide quiet operation.
Counterbalance System
A torsion-spring-operated system, enclosed in a structural steel barrel, effectively counterbalances the security grille for a minimum of 15,000 cycles. Higher cycle torsion springs are also available.
Bottom Bar
An extruded aluminum bottom bar reinforces the curtain and provides smooth operation.
Security Locks
Manually-operated grilles are provided with slidebolt locks. Other locking options are available.
Increased Security
6” center-to-center link spacing provides added protection.
Curtain Hood
Optional curtain hood has rolled edges and is formed from 24-gauge, hot-dipped galvanized steel, or aluminum.
Head Plate Cover
Head plate covers are offered for an attractive, finished appearance and help to protect your investment by keeping out dust and grime.
Auto Lock
Auto lock prevents the curtain from being forced open.
Motor Cover
Motor covers are helpful for noise reduction and provide an attractive look.
Standard Colors/Finishes
Mill Finish
Optional Colors/Finishes
Clear Anodized
Medium Bronze
| Model | Patterns | Material | Grille Size | Maximum Size | Color/Finish | Guides |
|---|---|---|---|---|---|---|
| GSA | Straight | Aluminum | 5/16″ Aluminum rods with Interlocking Aluminum Links | 35′ Width 24′ Height | Mill, Clear Anodized, Bronze Anodized | Aluminum |
| GBA | Brick |
| Door | |
|---|---|
| Type | Commercial Rolling Grille Door |
| Model | DuraGrille STANDARD |
| Mount | Interior or Exterior |
| Configuration | Single Door |
| Size | Maximum 35′ Width x 24′ Height |
| Operation | Manual, Hand Chain, Crank-Operated, Through-Wall Motor: Bracket Mount, Wall Mount |
| Drive | Left or Right Hand |
| Grille Pattern | Straight or Brick |
| Material | Aluminum |
| Bottom Bar | Extruded Aluminum |
| Operation | Clear Anodized, Bronze Anodized, or Mill Finish |
| Guides | |
| Mounting | Face or Jamb |
| Guide Constuction | Hot-Rolled Steel Angle or Extruded Aluminum |
| Jamb Constuction | Steel, Wood, Masonry or Non-masonry |
| Wear Strips | Wool Pile |
| Color/Finish | Black, Bronze Anodized or Clear Anodized |
| Counterbalance System | |
| Type | Torsion Spring System (Standard or High-Cycle) |
| Head Plates | Thickness: 3/16″, 1/4″, 3/8″ |
| Barrel | Size: 4″, 6″, 8″, 10″ |
| Springs | Inside Diameters: 2-7/8″, 4-9/16″, 4-7/8″, 6-1/4″, 8-3/8″; Configuration: Single, Duplex |
| Bearing Plug Assembly | Removable: 4″ or 6″; Welded: 8″, 10″ |
| Shafts | Solid Shaft: 1″, 1-1/4″, 1-1/2″, 1-3/4″, 2″ |
| Ring-Splits | 4″ Pipe: 7″, 7-1/2″, or 8″ Ring; 6″ Pipe: 9″ Ring |
| Counterbalance Hardware Includes all required components. | |
| Enclosures | |
| Hood | Type: Round or Square; Material: Steel (24 ga.) or Aluminum (.04″) |
| Color/Finish | Gray, Clear Anodized |
| Hardware/Accessories | |
| Miscellaneous Parts | Curtain Stops, Hood Support |
| Nuts/Bolts | Headplate Bolts, Lag Screws, Thread Cutters, Masonry Anchors, Hood Screws, Drive Pins |
| Lock | Locking Bars, Hand-Chain Lock, Thumb Turn Lock, Cylinder Lock or Auto Lock |
Select a link below to download Raynor DuraGrille security grille door specifications and drawings.
Standard Drawings
For Grille Patterns: Straight (GSA) or Brick (GBA)
| Interior Face Mount (N) | |||
|---|---|---|---|
| Manual Operation | DWG Drawing | ||
| Chain Operation | DWG Drawing | ||
| Crank Operation | DWG Drawing | ||
| Motor Operation | DWG Drawing | ||
| Between Jamb Mount/Under Lintel (J) | |||
| Manual Operation | DWG Drawing | ||
| Chain Operation | DWG Drawing | ||
| Crank Operation | DWG Drawing | ||
| Motor Operation | DWG Drawing | ||
| Face-Mounted/Under Lintel (J1) | |||
| Manual Operation | DWG Drawing | ||
| Chain Operation | DWG Drawing | ||
| Crank Operation | DWG Drawing | ||
| Motor Operation | DWG Drawing | ||
| Between Jamb Only (J2) | |||
| Manual Operation | DWG Drawing | ||
| Chain Operation | DWG Drawing | ||
| Crank Operation | DWG Drawing | ||
| Motor Operation | DWG Drawing | ||
DuraGrille Warranty
Door Curtain:
Raynor warrants the door and its component parts for one (1) year against defects in material and workmanship.
Hardware & Spring:
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year.
Warranty Limitations and Exclusions:
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by an qualified installer. This warranty applies only to door systems that are professionally installed by an authorized Raynor Dealer.
This limited warranty extends only to the original purchaser, provided the door is installed in the original purchaser’s place of business. This limited warranty is not transferable.
This limited warranty does not apply to black, charcoal, slate, and iron ore steel colors used on Raynor EnergyCore series, ThermaSeal Series, Commercial Country Manor and Commercial Aspen series doors when installed in areas experiencing extreme heat for prolonged periods of time. The result of these environmental conditions can elicit a failure of the polyurethane core of the door. The warranty also excludes doors which have been field painted where the paint does not include a solar reflective additive.
This limited warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. It also does not apply to damage or deterioration caused by saltwater coastal areas, hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this limited warranty. Field applied paint failure is not covered by this limited warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.
This limited warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this limited warranty.
This limited warranty does not apply to building damage caused by moisture infiltration through or around the door. A garage door system is water resistant, but not waterproof. When a garage door system is properly assembled, installed, and maintained the risk of significant water infiltration is low.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.
